RHINO RC456 Manual do Operador descarregar pdf (Página 17)

WORKING POSITIONS

Pull the pin in the sector support and turn the main frame to the right and rotate the arms so the wheels are

positioned as shown below (See Illustration 10).

During operation, the wide slots in the frame and arm flanges allow the arms to oscillate slightly to prevent damage

to teeth by rough ground surfaces. The narrow slots used in the transport positioning hold the arms in a rigid

position.

RIGHT-HAND RAKE OPERATING POSITIONS

Illustration 10

RAKING

Rotate the main frame and arms

to the left. Lock in place with pins.

SPREADING

Rotate the main frame and arms

to the left. Lock in place with pins.

TURNING

Rotate the main frame to the right

and the arms to the left. Lock in

place with pins.

TRANSPORTING

To reduce the width of the rake for transporting between fields , perform the following steps:

1. Raise the rake to the highest position.

2. Unlock the main frame at the Floating Arm (26) and rotate the frame so the forward wheel is at the top. Rotate the

arms to the horizontal position. Center the rake behind the tractor.

3. Move the floating arm stop to the forward position to lock the frame in position during transporting.

Illustration 11

Illustration 10

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 27 28

Sem comentários

RHINO RC456 Manual do Operador Página 17