RHINO RAMV2 Manual de Instruções descarregar pdf (Página 14)

2.4. Installing The Antenna

Installing the GSM Antenna

Figure 4

The phone Antenna is connected to the main unit by

plugging in the antenna into the back of the RAM unit

as shown in Figure 4.

2.5. Sim Card Setup And Functionality

Place the new SIM card in an existing mobile phone and deactivate (turn off) “pin code

request.” You may need to refer to your mobile phone manual on how to do this. Insert

the SIM card into the RAM.

Save the RAM phone number in your phone to easily recall for sending SMS

commands. i.e. RAM or Car Alarm or another meaningful name. This way when the

RAM calls because an SMS did not get through or sends a normal status message you

will know that it is the car that has attempted to call you and be able to take immediate

action.

Installing the Sim Card

Before you insert the Sim Card you must be certain that the POWER and BACKUP

BATTERY are removed from the alarm. You can then place the Sim Card in the holder

on the front of the unit as shown and re-apply power otherwise you will damage the

Sim Card!

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 39 40

Sem comentários

RHINO RAMV2 Manual de Instruções Página 14